JEDI KUNSTSTOFFTECHNIK GMBH - WEICH-PVC MADE IN GERMANY

The JEDI Kunststofftechnik GmbH is a leading manufacturer of high-quality plasticized PVC products and specialized in the production of rolls, sheets and films. Products on measure? Please send your individual request to us via the cuttings form. Product description: plasticized PVC rolled sheets, panels, sheet clear / colored cold resistant down to -35 ° C and -45 ° C from a thickness of 0.7 mm up to 12 mm Dimensions: width: 500 – 2200 mm thickness: 1.0 to 12 mm roll length: 20 / 50m Standard blanks for customers available Available: standard goods available in 20m rolls in stock special materials and dimensions on request Use: Gates, Industry, Separation of production and storage areas, Cold stores, Blinds, Soundproofing, Splash guard, Seals, Vibration protection, Bullet-trapping plates, Underlay for equipment, Lining of collection containers, Chemical industry, etc. Characteristics: good mechanical properties broad chemical compatibility low wear high transparency cold...

Our products may be used in the following areas of application for films: Strip curtains for hall partitions Curtains may be ordered to size upon customer request. For example, a customized configuration for wind permeability using modified overlapping parameters is possible. Strip curtains on measure? Please send your individual request to us via the cuttings form.

We manufacture all protective mats according to your specifications of shape and size, and produce the following: Floor protection – protective dirt trapper mats for entrances to private, industrial and commercial buildings – dirt and moisture is captured effectively and does not end up in the inside of the building. Chair mats – protection from pressure marks and scratching for delicate wood, laminate, stone, tile, etc. floor surfaces as well as protection for low pile, hard industrial carpets. Exercise mats – equipment mats – perfect for preventing sliding and as an underlay for sports equipment. By using this, you can guarantee more safety while exercising. Our protective mats can be used both for exercising at home or at the gym to prevent pressure marks. Noise reduction and footfall sound insulation – due to special material characteristics, our protective mats achieve an outstanding reduction of noise and level of footfall sound insulation. Gas cylinder – our plasticized...

The JEDI Kunststofftechnik GmbH strip curtains or foils are made for Soft-PVC shield welding workplaces to protect bystanders who are near or pass the workplace (protection against UV light, infrared rays, swirling sparks and flying sparks). However, they can’t be used to observe the welding process as a substitute for a welder’s shield. The quality of the shielding foils for welding protection is set to the highest standards. These may only be produced and distributed if they are tested in accordance with the German Industrial Standard (DIN) by external institutes and regularly monitored. JEDI Kunststofftechnik GmbH works closely with the testing laboratory DINCERTCO. The laboratory tests the welding protection curtains on the basis of DIN EN ISO 25980: 2015-01 (eye protection category I) and issues a certificate with a validity of 5 years, as well as a factory tour with the assessment of a functioning quality management system. At regular intervals, the quality of the welding...

Bullet traps for shooting ranges Lamella bullet traps and loops made from plasticized PVC have the important task of optimally absorbing the kinetic energy of projectiles which have been fired from a weapon. Traps prevent the bullets from going astray and ricocheting in the room, and therefore prevents them from causing damage or even endangering lives. Ensuring the safety of individuals at shooting ranges is of the utmost importance, and this is exactly what our plasticized PVC products achieve. Bullet trap on measure? Please send your individual request to us via the cuttings form.

Weich-PVC ist die Alternative für transparentes Plexiglas / Acrylglas Hochwertige Schutzprodukte – Trennschutzfolie und Gesichtsschutz Visier Die JEDI Kunststofftechnik GmbH bietet gewerblichen Kunden in Zeiten der Coronavirus Pandemie, eine hochwertige Weich-PVC Alternative zu Hart-PVC, Plexiglas / Acrylglas Trennwänden und Gesichtsschutz Visieren an. Für eine transparente Abtrennung mit einer PVC Trennfolie erreichen sie einen effektiven Schutz am Arbeitsplatz und schützen zusätzlich mit einem Gesichtsschutz Visier ihre Mitarbeiter und Kunden an weiteren Kontaktpunkten. Die Herstellung der Schutzprodukte findet vollständig in unserem Werk in Deutschland statt. Über 20 Jahre Erfahrung in der Herstellung von Weich-PVC Produkten für Unternehmen zeichnen uns aus. Effektiver Schutz für Kunden und Mitarbeiter Widerstandsfähiger Weich-PVC garantiert Langlebigkeit und kann selbstverständlich desinfiziert und wiederverwendet werden.