GREMTEK GMBH

GREMARK® GMDR is a printable, flame retardant, diesel resistant polyolefin heat shrink tubing in a ladder format for cable identification systems. GREMARK® GMDR is suitable for identifying cables and wires in electrical cabinets, cable harness assemblies for railway applications. -55 °C to +135 °C Ratio: 2/3:1 Recovery temp.: +135 °C

GREMARK® PG61 is a flat printable, flame retardant, polyolefin heat shrink tubing in a spool, for cable identification systems. GREMARK® PG61 is suitable for identifying cables and wires in electrical cabinets, cable harness assemblies, for commercial and railway applications.

GREMFLEX® EMP is a self extinguishing, halogen free, Polyester 0,25mm monofilament and 0,10mm tinned copper, expandable braided sleeve. GREMFLEX® EMP offers a continuous working temperature of -40°C up to +150°C. Polyester gives a good resistance to abrasion whilst copper confers excellent Electro Magnetic Interference (EMI) shielding protection properties (10 kHz to 1 GHz). GREMFLEX® EMP is suitable for the protection of cables and harnesses which are sensitive to electrical noise.

GREMFLEX® GMB PET is a range of expandable braided sleeves available in conveniently packaged dispensers. GREMFLEX® GMB PET has been specially designed to meet the requirements of wholesalers, distributors, repair shops and electrical work shops. GREMFLEX® GMB PET is a self-extinguishing, halogen free, Polyester, 0,22 mm monofilament, expandable braided sleeve. (Refer to GREMFLEX® PET data sheet for details).

GREMFLEX® GPY40B is a tubular polyester braided sleeve coated with an acrylic rubber. GREMFLEX® GPY40B offers a continuous working temperature of -40°C up to +155°C, an outstanding abrasion resistance and a good expansion rate. GREMFLEX® GPY40B is suitable for thermal protection where high abrasion resistance characteristics are required. Used widely within the automotive sector for the protection of fuel lines, pipes, hoses, wires and cables.

GREMFLEX® NO is a self extinguishing, meta-aramid (MPD-I - NomexTM) multifilament, braided sleeve. GREMFLEX® NO offers a continuous working temperature of -60°C up to +240°C, a good mechanical abrasion resistance, an excellent resistance to humidity, outstanding performances under Beta, Gamma and Xray radiation as well as a high resistance to chemicals. This product offers a limited expansion. GREMFLEX® NO is suitable for protecting cables and hoses in harsh environmental conditions.

GREMSHAPES® GBOS is a flame retardant hot melt lined polyolefin heat shrink moulded breakout, with up to 7 fingers GREMSHAPES® GBOS offers a superior resistance to oxidation, UV radiation and excellent encapsulation properties. GREMSHAPES® GBOS are suitable for used both on open air and on underground power distribution (up to 1kV) and telecommunication cables with PVC or XLPE sheets. -40 °C to +110 °C Ratio 3:1 Recovery temp. +125 °C

GREMTUBE®GBOS CS is a silicone cold shrinkable 3,4,5 or 6 finger cable breakout. GREMTUBE® GBOS CS breakout offers an easy and simple insulation and a good mechanical protection. GREMTUBE® GBOS CS breakout is suitable from 3 up to 6 fingers and meets a variety of configuration requirements.

Zur Reparatur etwaiger Kabelschäden

11kV bis 36kV SCHRUMPF VERBINDUNGSGARNITUR