LINKER-INDUSTRIE-TECHNIK GMBH

Test sieves of stainless steel (Material no. 1.4301 or 1.4571) for particle size determination in the standard diameters: 50 mm 75 mm 100 mm 150 mm 200 mm 203 mm 250 mm 300 mm 305 mm 315 mm 350 mm 400 mm 450 mm 500 mm 600 mm Fitted with test sieve fabric to DIN ISO 3310-1 and DIN ISO 3310-2 and to foreign standards (AFNOR, ASTM). Special designs to your specifications for almost all sieve heights and diameters. Please use our forms for your request or send us your drawing. Request analysis sieve Download (PDF 51 KB) Measurement document Acceptance test certificate EN 10 204 (DIN 50049) 3.1. The test certificate documents the standard in accordance with the average values measured for mesh width, wire diameter and mess width distribution actually measured by the analysis sieve. In the mesh width range from 20 µ to 1.6 mm, more meshes are measured then specified in the current Standard ISO 3310-1. Acceptance test certificate EN 10 204 (DIN 50049) download (PDF Dokument, ca. 118...

Made of aluminium with replaceable sieve inserts, with mesh widths corresponding to applicable regulations for chemists. Standard diameters: 12 cm 20 cm 31 cm 40 cm Consisting of cover, 2 sieve rings with adjustable over-pressure and catchment bowl with replaceable sieve inserts of varying mesh width. Alternatively made of stainless steel in the diameters: 12 cm 20 cm 31 cm 40 cm

Shaped filter as end sieve, truncated cone sieve, fabric cylinder, perforated plague cylinder, fabric rounds, sieve baskets of metal mesh fabric and perforated plate. Truncated cone sieve; perforated plate outside; fabric inside End sieve; fabric outside; perforated plate inside Truncated cone sieves; fabric outside; perforated plate inside Sieve basket of stainless steel; Walls and base of fabric; Flange of solid plate Sieve basket with handle; Walls of perforated plate and fabric Base; flange and bracket of solid plate Sieve basket of stainless steel; Walls and base of fabric; Flange of solid plate Anfrage Anfahrsieb Download (PDF 56 KB) Anfrage Hutsieb Download (PDF 55 KB) Anfrage Filterkorb Download (PDF 76 KB)

Made of stainless steel, aluminum or with plastic coating, of wire mesh, perforated sheet, for sorted setting of e.g. Test tubes, glass flasks. Please send us your request, if possible stating the desired material type, design and the required quantity. If necessary with a sketch or drawing. We also deliver small quantities. We send you our offer at short notice.

Dome and startup filters can be used as startup protection in pipes, and they protect downstream system parts, such as valves, pumps, meters etc. in the critical startup phase against dirt accumulation through weld beads, scale, rolling-scale parts, sealing residue, lubrication grease, etc. The dome and startup filter can be removed after the startup phase, e.g. during the first revision. Dome and startup filters consist of a flange and a wall (support body) of perforated plate. The dome or startup filter is covered with wire mesh inside or outside. We manufacture the dome and startup filters according to your desires i.e. you stipulate the dimensions. Therefore please use our printed forms for your inquiry, or send us your drawing. Inquiry startup filter Download (PDF 56 KB) Inquiry dome filter Download (PDF 55 KB) Inquiry filter basket Download (PDF 76 KB)

Please send us your request, if possible stating the desired material type, design and the required quantity. If applicable with a sketch or drawing. We also deliver small quantities. We send you our offer at short notice.

For continual or discontinual separation of oil and liquid grease floating on the surface, in stains or contiguous layers, as thick layers, thin films or stains, of cold or hot condensate, neutral to basic or acid, in calm or moving water. For ground water treatment (in deep wells), treatment ponds, coolant emulsions, industrial waste water, oil sumps, port facilities, refineries, railway depots, industrial washing plant (for machine components), curing plant, oil separators, sea transport, degreasing baths for galvanisation (and the metal-processing industry), manufacturers of edible oils, washing systems (for tanker vehicles and cars), the foodstuffs industry, Oils, liquid grease, petrol, kerosene, solvents and similar http://www.prt-gmbh.de/oeltrennfoerderer.html

Linker grader separators for the easy separation of dry, granular loose goods in powder form. The grader separator and the three catchment buckets are made of stainless steel. In LINKER grader separators, the loose goods are fed into the separator evenly from one of the buckets. The material is then separated into the two lower buckets opposite the outlets. This procedure can be performed several times, until material has reached to required quantity.

Cell sieves Wooden frame sieves Polyamide sieves Metal frame sieves Sieve cylinders Sieve baskets Other sieve technology If you can not find it here: Send us your sketch or drawing (CAD) and we deliver to you, your desired product.

Send us your request, indicating the type of material, design, and the amount required, possibly with a sketch or drawing. We also provide small quantities. Our offer to send you shortly.