HNP MIKROSYSTEME GMBH - HNP Mikrosysteme GmbH » precise pumps - smart solutions «

smartDoS ® is a flexible dosing and filling system that is configured according to customer requirements. On the one hand smartDoS ® is suitable for the ergonomic design of manual workstations for small and pilot series. On the other hand, production processes can be automated due to the integrability of mechanics and control technology. Advantages Dosing volumes in the microliter and milliliter range Adjustable dosing dynamic Wide viscosity range Self-priming micro pump Graphical user interface Signal exchange with PLC Gentle, bubble-free dosage No liquid quality loss Effective use of raw materials Cost and time savings Easy emptying, rinsing and adaption Applications Dosing in cosmetics Filling in the pharmaceutical sector Dosing of ink and colorants Bubble-free filling of oil dampers System components Micro annular gear pump Smart, intuitive control with mzr-Touch Control Filters, different sizes and mesh width Reservoir Shut-off valve Dosing needle Hand or foot...

The Modular Dosing System (MoDoS ®) from HNP Mikrosysteme is a tailor-made pump system for continuous delivery in fine chemical and pharmaceutical production. MoDoS ® is synonym for a design concept and a modular component system, forming the base for the concept development of a customized pump module. The manufacturer-independent selection of the sensors for flow, pressure, temperature, among others is based on the given process parameters. MoDoS ® expands the system boundary from pump towards pumping system. Actuators are supplemented by measurement and control technology, and offered as a complete solution for process-reliable pumping in the low flow range. Advantages Ready-to-use unit fully equipped and assembled system in a rigid framework Modular system of components individually equipped with micro annular gear pump, filters, sensors (e.g. flow, pressure, temperature) valves, fluid connections Chemical resistant materials material combinations from stainless steel / hard...

Dispensing unit for precise low volume dosage The dosage module for the mzr-2505 (S/F), mzr-2905 (S/F) and mzr-4605 (S/F) pumps can be used for volumetric dosage of adhesives like UV cure adhesive, epoxy resin, screw fixing varnish, lubricants and silicon. The dosage module suits the dispensing of smallest amounts of liquids requiring highly precise handling (small beads or spots) and the absence of afterrun. The liquid can be supplied from a 30 or 55 ml disposable cartridge which is directly connected to the pump. For liquids with higher viscosity, pressure of up to 5 bar may be applied to the cartridge. An air discharge screw enables to bleed the system after cartridge exchange or to supply flushing liquid for cleaning. The dosing needles can be directly connected to the Luer-Lock male adapter of the pump. With the fixing bracket the module may be mounted onto the handling device. Advantages High dosage precision precision CV <1% at low volumes Exchangeable reservoir for...

LiquiDoS ® is the comfortable and versatile dosing system for analysis, research and development. The compact system with its equipment components is configured according to customer requirements and delivered ready-to-use (ready for operation). The comfortable, intuitive graphical user interface enables easy programming, reproducible results and a fast change between manual and automated dosing tasks. Advantages Smallest volume 0.25 µl Flow from 1.5 µl/min up to 72 ml/min Precise dosing in the microliter and milliliter range Self-priming micro pump Operation via touch screen External start signal Gentle, bubble-free dosing Low-shear dosing of the medium Short fluid connections, optimal dead volume Media-resistant material combinations Easy emptying and rinsing Fast change of media Effective use of reagents Cost and time saving Applications Instrumental analytics Micro-reaction technology Biotechnology Diagnostic Analyses in the Life Science sector Laboratory Automation Typical...

The Micro Dispense Module µDispense ® is a compact system for the precise dosing and metering of liquids in the microliter to milliliter range. µDispense ® guarantees a process-safe liquid handling, with high precision and trueness. It reduces maintenance expenses due to its long service life. The size of a Micro Dispense Module corresponds to the half-height syringe pumps format. With the Cavro ® script language protocol and an extended command set, syringe pump programs can be processed. Due to the interface compatibility, syringe pumps can easily be replaced. The Micro Dispense Module is characterized by its modular design with optional modules, such as shiftable in- and outlet, optional pump size, filter and flow sensor. The core component is a micro annular gear pump, a robust and highly precise device with an extremely long service life and low pulsation. The quiet and rotatory operating micro annular gear pump allows dispensing smallest volumes of liquid on the one hand,...

For industrial production and process technology The micro annular gear pump mzr-2505 covers the flow rate range 0.0015 - 9 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2505 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low...

For industrial production and process technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2905 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low...

For industrial production and process technology The micro annular gear pump mzr-4005 covers the flow rate range 0.006 - 36 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4005 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low...

For industrial production and process technology The micro annular gear pump mzr-4605 covers the flow rate range 0.012-72 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4605 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low...

For industrial production and process technology The micro annular gear pump mzr-6305 covers the flow rate range 0.024-144 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-6305 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable even for low viscosity liquids Compact dimensions length 156 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low...