HNP MIKROSYSTEME GMBH
Deutschland
µDispense Compact and smart dosing system
Beschreibung
The Micro Dispense Module µDispense ® is a compact system for the precise dosing and metering of liquids in the microliter to milliliter range. µDispense ® guarantees a process-safe liquid handling, with high precision and trueness. It reduces maintenance expenses due to its long service life. The size of a Micro Dispense Module corresponds to the half-height syringe pumps format. With the Cavro ® script language protocol and an extended command set, syringe pump programs can be processed. Due to the interface compatibility, syringe pumps can easily be replaced. The Micro Dispense Module is characterized by its modular design with optional modules, such as shiftable in- and outlet, optional pump size, filter and flow sensor. The core component is a micro annular gear pump, a robust and highly precise device with an extremely long service life and low pulsation. The quiet and rotatory operating micro annular gear pump allows dispensing smallest volumes of liquid on the one hand,...
Produktmerkmale
Pumps | mzr-2521, mzr-2921, mzr-4622 |
Flow rate range (without control) | up to 72 ml/min * |
Controlled flow rate range | 1 - 1,000 µl/min * |
Dosing volume | beginning from 1 µl |
Precision CV | < 1% (Coefficient of variation CV) |
Differential pressure range | 0 - 1.5 bar (22 psi) |
Storage temperature range | -20 … +65 °C (+104 ... +149 °F) |
Liquid temperature range | -5 ... +60 °C (+23 ... +140 °F) @ 20 ... 95 % humidity |
Viscosity range | up to 5mPas |
Liquids | aqueous solutions, solvents |
Materials of pump | graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM |
Additional materials | PMMA, optional: PEEK™; valve: PEEK™, FFPM optional: PPS, FPM, EPDM; volume flow sensor: borosilicate |
Seal materials | FPM, optional: EPDM, FFPM |
Electronics | ARM Cortex M3 microprocessor |
Motor | brushless DC-motor (BLDC); nominal voltage 24 V, torque 3.3 mNm; analog hall sensors |
Electrical connection | D-sub plug, 15-pole (male connector) |
Power supply | 24 V DC ±10 %, max. 1.5 A |
Interface | RS-232 and RS-485 with 9600 or 38400 Baud; CAN with 100 and 125 kBaud |
Protocol | standard commands of syringe pumps OEM Communication (OC) protocol and Data Terminal (DT) protocol |
Addressing | max. 15 devices with RS-485 Bus ("daisy-chaining"); max. 15 devices with CAN-Bus |
Inputs and outputs | 2 additional digital inputs with TTL Level; 3 additional outputs with TTL level |
Fluid connection | 1/4"-28 UNF |
Accessories | additional fluidic inlets and outlets, filter, gear box, volume flow sensor |
Dimensions (L x W x H) | 106.7 x 44.4 x 127.0 mm (4.2" x 1.75" x 5.0") |
Weight | approx. 800 g |
Remarks | * depending on the size of the micro ring gear pump. |